john-deere

Suggested Starter Tool Set

AGRICULTURAL EQUIPMENT TECHNOLOGY

Measuring Equipment
6” Steel Rule

25’ Steel Tape
English/metric Feeler Gauge Set. offset
English/Metric Feeler Gauge Set. straight
¼” Drive Torque Wrench 0-75 inch lbs dial
3/8” Drive Torque Wrench 0-150 dial
½” Drive Torque Wrench 30-250 ft lbs click
0-6” Calipers English/Metric
Tire Pressure Gauge (50 psi.)
Digital Multi-meter (Fluke Brand only)
Voltage Test Light
Flashlight (Two D-Cell or larger)
Miniature Flashlight (Two "AA" Cells)
AC Thermometer or temp pickup for fluke

Pliers      
6” Needle -Nose Pliers
7” Diagnal Cutters Pliers
12” Channel Lock Pliers
6” Long-nose Visegrip Pliers
4” Visegrip Pliers
10” Visegrip Pliers
9” External Snap Ring Pliers (1 7/16" Jaw Spread)
Internal/External Snap Ring Pliers Kit
Telescoping Magnetic Pick-up Tool

Hammers, Files, Hacksaws, & Pry Bars
12 oz. Ball Peen Hammer
1 lb. Ball Peen Hammer
3 lb. Engineer’s Hammer
2 or 3 lb. Dead Blow Hammer
24 oz. Brass Tip Hammer
Hacksaw with Blades
0-Ring Pick Set
8” to 24” Pry Bar Set with Handles (Set of 4)
20” Rolling Head Bar (Set of 4)
10” Gasket Scraper
10” Mill File with Handle
8” X 5/16” Diameter Round File with Handle
12” X 3/8” Diameter Round File with Handle
Die grinder with cutoff wheel and carbide burs can be subbed for hack saw and files

Wrenches
English Combination Set (3/8" to 1 1/4")
Metric Combination Set (8mm to 32mm)
Ignition Wrench Set (7/32" to 3/8")
Flare Nut Wrench Set (3/8" to 3/4")
Tappet Wrench Set (3/8" to 3/4")

Screw Drivers
2" Flat Tip
4" Flat Tip
8" Flat Tip
10" Flat Tip
14" Flat Tip
No. 1 Phillips
No. 2 Phillips
No. 3 Phillips
No. 4 Phillips
Screw Starter

Punches & Chisels
1/2" Dia Brass Drift
Center Punch
1/8" Pin Punch
5/32" Pin Punch
3/16" Pin Punch
1/4" Pin Punch
1/8" Starting Punch
1/4" Starting Punch
3/8" Cold Chisel
1/2" Cold Chisel
3/4" Cold Chisel

Sockets
1/4" Drive Set (1/4" to 1/2") 6pt
3/8" Drive Set (3/8" to 7/8") 6pt 12pt
1/2" Drive Set (3/8" to 1 1/4") 6pt 12pt
3/8" Drive Metric Set (8mm to 24mm) 6pt 12pt
1/2" Drive Metric Set (10mm to 32mm) 6pt 12 pt
3/8" Drive Deep Set (3/8" to 7/8") 6pt
3/8" Drive Metric Deep Set (8mm to 24mm) 6pt
1/2" Drive Deep Set (3/8" to 1 1/4") 6pt
1/2" Drive Metric Deep Set (10mm to 32mm) 6pt
3/8" Swivel Set (3/8" to 3/4")
3/8" to 1/2" Adaptor
1/2" to 3/8" Adaptor

Tool Storage
Drawer Tool Chest and/or Roll-A-Way

Optional Tools
3/8" Air Drive Impact Ratchet
3/8" Impact Socket Set (3/8" to 7/8")
1/2" Air Impact Wrench
1/2" Impact Socket Set (3/8" to 1 1/4")
Dial Indicator with Magnetic Base (Range 1" in. 001" Increments)
Micrometer 0-1", 1-2", 2-3"
¼ Right Angle Air Die Grinder
Roll pin Punch Set (Mayhew)